Rotary table bearing is a very widely used large bearing, how to improve the service life of the rotary table bearing? There are a lot of consumers have asked this question, today Xiaobian to give you a brief introduction! Let's study together!

How to improve the service life of bearings:

1. Allowable speed: 0.3-0.5 times of the bearing limit speed under the condition of correct installation and good lubrication. Under normal circumstances, 0.2 times the limit speed is the most appropriate.

2, use parts: tapered roller bearing is suitable for bearing radial and axial combined load mainly by radial load, usually used with two sets of bearing pairs, mainly in the front and rear hub of the car, driving bevel gear, differential, reducer and other transmission parts.

3. Inclination Angle is allowed: tapered roller bearings are generally not allowed to tilt the shaft relative to the shell hole, if there is a tilt, the maximum is not more than 2 '.

4, allowable temperature: under the normal load, and the lubricant has high temperature resistance, and lubrication is sufficient, the general bearing is allowed to work in the ambient temperature of -30℃-150℃.

Through the introduction of the above points, we learn how to improve the service life of the rotary table bearing? In short, in the use of rotary bearings also need regular maintenance and maintenance, it will be more effective to improve work efficiency, as soon as possible!